Expert Answers about Cable Locks
- Using Yakima LockUp Hitch and Cable Lock # Y07238
- Once the rack is locked into the receiver, the end of the cable with the loop is passed around the shank of the rack near the receiver. Then the end of the cable with the locking tip is passed through the loop, and the cable is pulled snug. The remainder of the cable passes through the bike frames and the end of the cable with the metal tip comes around to connect to the lock threaded onto the cable.
The process is very easy in practice, but difficult to describe in words. Take a look...
view full answer... - Locking Options for the ToyLok Advanced Security 15 foot Retractable Cable w/ Lock
- There are two locking options. The first is to loop the cable through a secure area on the item you are securing and then attach the end of the cable back to the locking lug on the ToyLok.
The second option is to loop the cable through a secure area on the item you are securing and then lock the end of the cable back around the cable itself. I produced a short video showing the locking options for you.
view full answer... - Installing the Cable Locks and Hitch Lock for Kuat Transfer 3 Bike Rack
- I can certainly walk you through the installation of the Cable Locks and Hitch Lock for Kuat Transfer 3 # PTSCLK13. These locks are specifically designed for the Transfer 3 Bike Platform Rack TS03G.
To install the cable lock, you will need to remove the black end cap on the end of the ratcheting arm. Once the end cap is removed, you will slide the cable into the ratcheting arm and the black cap will set in the end of the arm. You will then use the included hardware to secure the cap in...
view full answer... - How to Use Replacement Integrated Cable Lock for RockyMounts SplitRail Bike Rack
- You can replace the integrated cable lock of your RockyMounts SplitRail LS 3-Bike RKY11404-3 and 4-Bike RKY11404-4 with the SplitRail Integrated Cable Lock Replacement # RKY12005.
I asked a representative of RockyMounts about how to replace this lock and was told that you will only need to undo a set screw and they include a Torx wrench with the lock so you can easily accomplish this.
view full answer... - How To Use Optional # PTSCLK12 Cable Lock Kit for Kuat Transfer 2 Bike Rack
- The cable lock kit for the Kuat Transfer Bike Rack, part # PTSCLK12 includes locks for two bikes. The cable locks would install in the end of the bars that secure the bikes to the TS02G rack, as shown in the diagram I've provided from the instructions.
view full answer... - How Does the Cable Release Lever Lock Prevent Theft on the Thule OutWay Trunk Mount Bike Rack
- The cable release levers for the Thule OutWay Trunk Mount Bike Rack, # TH45JV, lock on both sides. This is all that is needed because if the bike rack is installed correctly and tightened down, a would-be thief would not be able to get the cables off. With the right side cables under tension, the bike rack cannot be pushed up or pulled down enough to get the hooks off.
view full answer... - What Can the ToyLok Advanced Security 15 foot Retractable Cable with Lock be Used With
- You can use the ToyLok Advanced Security 15 foot Retractable Cable with Lock, # LC337120, on anything you can get the head and 5/16 inch diameter cable through. The head, or lead, of the cable is actually larger than the cable. This cable is designed to be mounted on a trailer frame or in a truck bed, for example, to secure things like lawnmowers. It is not designed to secure consumer electronic devices. Those types of locks are much smaller. We do not carry those types of cable locks.
view full answer... - Do the Wheelbase Knobs on the Curt 4 Bike Rack Lock?
- The adjustable wheelbase cradles on the Curt 4 Bike Platform Rack - 2" Hitches - Frame Mount - Tilting # C18087 do not have an option to add a lockable knob. The are able to remove the whole assembly. However, if you are concerned about security, I recommend attaching a Saris Cable Lock - 8' Long # SA981. With the cable lock, you can loop the cable through the cradles and attach them to the rest of the rack to deter theft. The cable lock can also add more security to your bikes.
view full answer... - Is the Saris Cable Lock # SA981 a Retaining Lock
- The lock core of the Saris Cable Lock # SA981 has a spring in it so that it always wants to return to the locked position. You would have to twist the key to get the core to unlatch the lock so that you can release the latch, but then it will automatically go back to the locked position.
You can remove the key when in the unlocked position.
view full answer... - How to Use the Cable Lock of Part # HRLHPTC With a Hollywood Racks HR200
- To use the cable lock portion of the # HRLHPTC will require a bit of creativity as you said there are no welded loops on the rack to route the cable through to attach it to the rack.
Instead you would want to wrap the cable several times around the main cross bar of the rack routing it through the spokes of the bikes as well. This will take up all of the slack and make it impossible to slip the cable off the rack with the bikes.
view full answer... - How Long is the Integrated Locking Cable on the Thule Apex XT 4
- The lock on the Thule Apex XT4 # TH9025XT is going to be approximately 36" long and runs from the mast of the rack to the front of one of the bars, where it is locked into place. I've seen these used with many adapter bars, but I can understand your concern that it won't be long enough to run under the frames of the bikes. For that reason you may want to instead use an extra long cable lock like the Malone LockUp Cable Lock # MPG357 which is 10 feet long and will allow you to secure all...
view full answer... - Using Thule # TH538XT Cable Lock with Thule Hitching Post Pro Bike Rack
- The Thule Hitching Post Pro, # TH934XTR features an eye ring to run a cable lock like part # TH538XT through, the cable lock would be an excellent choice.
Keep in mind that the purpose of a lock is to keep honest folks honest. A determined thief will get what they want despite any precautions taken. The idea is to make the crook move on to easier pickings.
view full answer... - How to Use the Cable Lock That Comes with the Kuat NV 2.0 Base # BA22B
- The integrated cable locks that come on the Kuat NV 2.0 Base # BA22B automatically lock when you connect the 2 ends together. When you put the key in and turn it you are actually unlocking it which is why they pop out.
If you skip to the 4:15 mark on the linked review video you can see how the cable lock automatically locks.
view full answer... - Can I Lock A Tailgate Bike Rack To My Vehicle
- All of our tailgate pad bike racks, like Thule GateMate Pro Tailgate Pad for Full-Size Trucks - Up to 7 Bikes - 53" Wide, part # TH823PRO, can be locked to your truck via a cable lock like the etrailer Cable Lock - 10' Long - 5/16" Diameter - Steel - Keyed Alike, part # e98891. I recommend threading this cable through the opening in the tailgate bike racks and down then inside of the handle to a tie-down hook.
If you want a more permanent solution, you can install the ToyLok Stake Pocket...
view full answer... - Can the etrailer Cable Lock Be Used to Secure Kayaks to a Trailer with Kayak Carriers
- What you are saying makes sense to me. As long as your scupper holes are larger than 5/16" in diameter, the etrailer Cable Lock # e98891 will fit through the holes. It seems like a pretty ingenious way to secure your kayaks, especially given that most kayaks do not have great locking points.
The other nice thing about the etrailer Cable Lock # e98891 is that if you order more than 1 and select the keyed alike option, you can have one key that operates all of the locks.
view full answer... - Can ToyLok Retractable Cable Lock with Padlock # LC337120 Work without Being Secured to Surface
- Yes the ToyLok Retractable Cable Lock with Padlock # LC337120 that you referenced can work like you are wanting it to. You can loop it through something and once you lock the cable it would secure it anything it was threaded through together.
view full answer... - Does the Thule T2 Pro XTR Bike Rack Use Different Keys for the Cable Locks and the Hand Knob Lock
- No, the Thule T2 Pro XTR Bike Rack for 2 Bikes # TH83JV does not have separate keys for the hitch lock (hand knob) and the cable locks.
The Thule T2 Pro XTR Bike Rack for 2 Bikes # TH83JV use the One-Key System, so the one key will operate both locks.
view full answer... - Can the Anti-Rattle Lock and Cable be Used Without the Cable on a 2012 Subaru Outback Wagon
- Yes, if you use the Anti-Rattle Hitch Lock, # S64030, without the security cable the anti-rattle lock will still secure the bike rack in the hitch and keep it from rattling.
view full answer... - Retracting The Cable For The Lippert ToyLok Retractable Cable Lock
- To retract the cable on your ToyLok Retractable Cable Lock # LC337120, extend it until no clicking sound is heard. If you notice dirt or moisture on the cable clean it before retracting.
Allow the cable to retract back into the housing.
It may be necessary to guide the cable slowly into the housing in some situations.
NOTE: ToyLok has a built-in safety feature which slows the cable as it retracts.
If you no longer hear the clicking noise as the cable is extended then the internal...
view full answer... - Does the Swagman XTC-2 Two Bike Platform Bike Rack Have Locking Frame Hooks
- The frame hooks on the Swagman XTC-2, # S64670, do not have a locking mechanism, but you will be able to use Trailer Coupler Lock, # e98884, in the available holes on the hook housing. These locks will work unless you have two bikes with the same frame height. If so, you will be able to use a cable lock if you have one.
If you need a cable lock, I recommend the Master Lock Quantum Self-Coiling, Combination Cable Lock - 1/2" Diameter x 6' Long # 8122D. Just secure this lock from the bike...
view full answer...
Go To Results